404 forum

Discussion about 404

Back to the main 404 site

You are not logged in.

Announcement

Posting rules
  • Please do not post solutions to puzzles, but rather post hints as appropriate in response to queries
  • Type [spoiler] ... [/spoiler] around the outside of any hints so they can't be read by accident - e.g. [spoiler]have you tried looking at the corner of the page?[/spoiler]

#1 2019-11-26 15:53:13

Rolytic
Member
Registered: 2019-11-18
Posts: 23

Help please and thank you

Hello, it's me again

Spoiler

I have a photocopy of the ID. but I've tried to put it on (or scale it on) puzzle 31. But I don't get anything closer to a word.

And if I instead looking for the third of those eye symbols, then I counted this one (puzzle 33) as the third.

So what am I missing here?

Offline

#2 2019-11-26 16:23:07

winterer
Member
Registered: 2019-11-18
Posts: 126

Re: Help please and thank you

Rolytic wrote:

Hello, it's me again

Spoiler

I have a photocopy of the ID. but I've tried to put it on (or scale it on) puzzle 31. But I don't get anything closer to a word.

And if I instead looking for the third of those eye symbols, then I counted this one (puzzle 33) as the third.

So what am I missing here?

Spoiler

Did you find a trail to follow?

Offline

#3 2019-11-29 06:35:33

Becky_P
Member
Registered: 2019-11-26
Posts: 31

Re: Help please and thank you

winterer wrote:
Rolytic wrote:

Hello, it's me again

Spoiler

I have a photocopy of the ID. but I've tried to put it on (or scale it on) puzzle 31. But I don't get anything closer to a word.

And if I instead looking for the third of those eye symbols, then I counted this one (puzzle 33) as the third.

So what am I missing here?

Spoiler

Did you find a trail to follow?

I have

Spoiler

found the trail.  But where to begin/place it?

Offline

#4 2019-11-29 07:07:11

winterer
Member
Registered: 2019-11-18
Posts: 126

Re: Help please and thank you

Becky_P wrote:
winterer wrote:
Rolytic wrote:

Hello, it's me again

Spoiler

I have a photocopy of the ID. but I've tried to put it on (or scale it on) puzzle 31. But I don't get anything closer to a word.

And if I instead looking for the third of those eye symbols, then I counted this one (puzzle 33) as the third.

So what am I missing here?

Spoiler

Did you find a trail to follow?

I have

Spoiler

found the trail.  But where to begin/place it?

Spoiler

Have you been briefed? Then note the start of the trail!

Offline

#5 2019-11-29 11:52:08

Becky_P
Member
Registered: 2019-11-26
Posts: 31

Re: Help please and thank you

winterer wrote:
Becky_P wrote:
winterer wrote:
Spoiler

Did you find a trail to follow?

I have

Spoiler

found the trail.  But where to begin/place it?

Spoiler

Have you been briefed? Then note the start of the trail!

Spoiler

I have read the brief.  Tried applying the trail to the brief, but having had no luck there am looking for the 3rd location

Offline

#6 2019-11-29 12:08:47

winterer
Member
Registered: 2019-11-18
Posts: 126

Re: Help please and thank you

Becky_P wrote:
winterer wrote:
Becky_P wrote:

I have

Spoiler

found the trail.  But where to begin/place it?

Spoiler

Have you been briefed? Then note the start of the trail!

Spoiler

I have read the brief.  Tried applying the trail to the brief, but having had no luck there am looking for the 3rd location

Spoiler

The start of the trail is obvious. You need to find the place where to place it. Think ball and socket joint.

Last edited by winterer (2019-11-29 12:25:31)

Offline

#7 2019-12-01 20:25:03

Wabanaba nubnub
Member
Registered: 2019-11-19
Posts: 3

Re: Help please and thank you

Still stuck on this one..

Spoiler

the 'trail' that needs to be coppied is obvious to mo, but where to? The 'third location'? Puzzle nr. 3? Page nr. 3?  I've tried mirroring the trace, but no luck there

Thanks for any help

Offline

#8 2019-12-03 20:20:35

Stavr0s
Member
Registered: 2019-11-18
Posts: 29

Re: Help please and thank you

Me too. Still stuck. I think I got the basic idea but don't know where to apply it.

Spoiler

How do I find the 'third location'. It can relate to a lot of things but none of them seem to give any viable answer.

Offline

#9 2019-12-03 21:48:34

Rolytic
Member
Registered: 2019-11-18
Posts: 23

Re: Help please and thank you

winterer wrote:
Becky_P wrote:
winterer wrote:
Spoiler

Have you been briefed? Then note the start of the trail!

Spoiler

I have read the brief.  Tried applying the trail to the brief, but having had no luck there am looking for the 3rd location

Spoiler

The start of the trail is obvious. You need to find the place where to place it. Think ball and socket joint.

Spoiler

Your definition of obvious and mine and clashing right now. Wish that weren’t true.

Does it need to be resized to the same as puzzle 31? Still hasn’t helped over there though

I’m still stuck on this one. Any help?

Offline

#10 2019-12-04 07:44:43

winterer
Member
Registered: 2019-11-18
Posts: 126

Re: Help please and thank you

Rolytic wrote:
winterer wrote:
Becky_P wrote:
Spoiler

I have read the brief.  Tried applying the trail to the brief, but having had no luck there am looking for the 3rd location

Spoiler

The start of the trail is obvious. You need to find the place where to place it. Think ball and socket joint.

Spoiler

Your definition of obvious and mine and clashing right now. Wish that weren’t true.

Does it need to be resized to the same as puzzle 31? Still hasn’t helped over there though

I’m still stuck on this one. Any help?

Major hint:

Spoiler

Nothing needs to be resized. The start of the trail is on the left, a point slightly thicker than the rest of the trail. The start of the trail needs to be placed somewhere appropriate: as it's round, it must be placed on something round. You'll need to have the choice of at least three such locations. Are we now on the same page? wink

Offline

#11 2019-12-05 13:23:22

Alex55
Member
Registered: 2019-11-18
Posts: 121

Re: Help please and thank you

Spoiler

If isn't 31, then where?

Offline

#12 2019-12-10 21:53:22

Stavr0s
Member
Registered: 2019-11-18
Posts: 29

Re: Help please and thank you

Spoiler

Still no clue where to place the trail. You can find something round on nearly every page.

Offline

#13 2019-12-11 07:41:12

winterer
Member
Registered: 2019-11-18
Posts: 126

Re: Help please and thank you

Stavr0s wrote:
Spoiler

Still no clue where to place the trail. You can find something round on nearly every page.

Spoiler

Most puzzles don't require you to look elsewhere. On this page, you have four obvious spots where to place the start of the trail.

Offline

#14 2019-12-11 11:36:36

Alex55
Member
Registered: 2019-11-18
Posts: 121

Re: Help please and thank you

Spoiler

I place the trail in access. now word found

Offline

#15 2019-12-22 10:12:27

Alex55
Member
Registered: 2019-11-18
Posts: 121

Re: Help please and thank you

Spoiler

.I copy the signature anf try to put it in the circle of access. How I get letters? ..

Offline

#16 2019-12-31 13:07:27

Alex55
Member
Registered: 2019-11-18
Posts: 121

Re: Help please and thank you

Any new idea?

Offline

#17 2020-01-01 05:56:45

kite
Member
Registered: 2019-11-29
Posts: 13

Re: Help please and thank you

Spoiler

You've placed the signature so it begins at the third location (of four)? Then follow where it goes. It’s about the journey, not the destination.

Offline

#18 2020-01-01 11:25:40

Alex55
Member
Registered: 2019-11-18
Posts: 121

Re: Help please and thank you

Spoiler

the signature find some letters but I can't make a word. letters t e c t r e  maybe .

Offline

#19 2020-01-01 18:20:51

kite
Member
Registered: 2019-11-29
Posts: 13

Re: Help please and thank you

Spoiler

If you use a very precise tracing and take all letters it touches in order of when it touches them (following along the loops and all) you should get a three word sentence that starts with TR. One place, it takes three letters in a row. Interpreting the statement gives you the one word answer.

Offline

#20 2020-08-12 10:04:45

AcidBurn39
Member
Registered: 2020-08-11
Posts: 120

Re: Help please and thank you

Can someone please tell what trail are talking about and how to place and use it?

Offline

#21 2020-08-12 12:57:39

AcidBurn39
Member
Registered: 2020-08-11
Posts: 120

Re: Help please and thank you

kite wrote:
Spoiler

If you use a very precise tracing and take all letters it touches in order of when it touches them (following along the loops and all) you should get a three word sentence that starts with TR. One place, it takes three letters in a row. Interpreting the statement gives you the one word answer.

Can somebody give more precise direction of trail?

Offline

#22 2020-08-12 13:06:41

AcidBurn39
Member
Registered: 2020-08-11
Posts: 120

Re: Help please and thank you

Spoiler

Truth is.. what is the last word of the phrase??

Offline

#23 2020-08-12 13:22:58

AcidBurn39
Member
Registered: 2020-08-11
Posts: 120

Re: Help please and thank you

Spoiler

follow the trail starting in 3rd location
it helps if you have transparent paper
6 letter word is the solution

Offline

#24 2021-02-28 19:58:49

Mic140
Member
Registered: 2021-02-28
Posts: 4

Re: Help please and thank you

I need help!  I know what to do but can someone please tell me which page I have to go on.  I cannot get it with all the clues.

Offline

#25 2021-02-28 23:27:24

404
Administrator
Registered: 2019-11-17
Posts: 59

Re: Help please and thank you

Everything you need is on the page - you don't need anything else at all. Just follow the brief.

Spoiler

Thin paper to help you trace might be useful, though.

Offline

#26 2021-06-17 16:31:17

Peadae2211
Member
Registered: 2021-06-17
Posts: 2

Re: Help please and thank you

This is the last one to do and it still doesn't make any sense.


Spoiler

I trace the signature and put it over the o's on the left? And then 3 words are created from where it crosses the text? This is my interpretation of what I've read so far, but I don't have paper thin enough for that level of accuracy. 

Offline

#27 2021-06-17 17:51:52

404
Administrator
Registered: 2019-11-17
Posts: 59

Re: Help please and thank you

If this is the last one left, you've done well!

Spoiler

The final answer is a single, 6-letter word, but you first of all need to find a three-word phrase on the gridded part of the page (the 'overseer card') that reveals that 6-letter word.

Here's what you need to do:

Spoiler

The signature needs to be shifted so it starts on the third 'o' down. One option is to redraw it by eye, making use of the grid paper that it has been drawn on. That's how we tested it. It's a bit fiddly, but it can be done.

The lengths of the words are:

Spoiler

5, 2, 6

The first letters of the words are:

Spoiler

T, I, T

Offline

#28 2021-06-17 18:45:43

Peadae2211
Member
Registered: 2021-06-17
Posts: 2

Re: Help please and thank you

404 wrote:

If this is the last one left, you've done well!

Spoiler

The final answer is a single, 6-letter word, but you first of all need to find a three-word phrase on the gridded part of the page (the 'overseer card') that reveals that 6-letter word.

Here's what you need to do:

Spoiler

The signature needs to be shifted so it starts on the third 'o' down. One option is to redraw it by eye, making use of the grid paper that it has been drawn on. That's how we tested it. It's a bit fiddly, but it can be done.

The lengths of the words are:

Spoiler

5, 2, 6

The first letters of the words are:

Spoiler

T, I, T

Thanks, at least I know I'm onto the right track, but I still can't make it work.

Spoiler

I've got tervat. Is that close?

Offline

#29 2021-06-18 09:43:07

404
Administrator
Registered: 2019-11-17
Posts: 59

Re: Help please and thank you

Peadae2211 wrote:

Thanks, at least I know I'm onto the right track, but I still can't make it work.

Spoiler

I've got tervat. Is that close?

Oops - sorry, it's a long time since I looked at this puzzle and I gave you the wrong answer yesterday:

Spoiler

You were right, it is 3 words that the signature creates; but the answer to the puzzle is a single word. I'll edit my previous answer for anyone reading this discussion in the future.

The first letter is 't' as you say, but the rest of it is wrong, and there is no 'v' on the grid in any case so I suspect that something has gone wrong. Did you get the 'v' from the heading that reads 'overseer'?

You might want to re-read my answer from yesterday, now I've updated it, in case this helps you sufficiently that you can now solve it (and sorry for confusing you!).

Or alternatively here's a picture of the signature overlaid on the text, so you can see how it is intended to be placed: https://www.book-404.com/Code%2033%20si … gnment.png

Tracing the signature like this is much fiddlier than I intended it to be, so I'm sorry you've had such trouble with it.

Offline

Board footer

Powered by FluxBB